Test & measurement
Since 1986 Mundorf has been supplying audio components of the very highest quality. With precision craftsmanship, the finest materials, and a constant search for new methods, they create components of the very highest class for loudspeaker boxes and audio electronics. Products like the coils/inductors and the M-CAP range of capacitors are internationally recognized as guarantees for the finest sound and are used all over the world. Also available are high-grade crossover resistors, electrolytic capacitors, and tweeters.
Mundorf offers today's largest selection of Air Motion Transformer (AMT) tweeters worldwide. The different lines were developed for certain applications and requirements. All Mundorf HiFi AMT tweeters have two superior key properties: excellent transient response and outstanding low distortion ratio. The differences lie mainly in their frequency ranges, sound pressure levels, and dispersion angles. AMT19 and AMT21 series, like the Mundorf AMT19CM1.1-C and the Mundorf AMT21CM2.1-C, are designed for use in 3+ way systems, whereas AMT23 and AMT25, like the Mundorf AMT23CM1.1-R and the Mundorf AMT25CS2.1-R models, are also suitable for 2+ way applications.
Mundorf’s’ capacitors are a cornerstone of polypropylene and electrolytic capacitors. We, at SoundImports, offer five of their top lines.
The MCap® EVO was designed in 2012 as the successor of the RXF to facilitate the utmost musical enjoyment even in small spaces on a limited budget. The PP capacitor film used here is first metalized with the thickest possible aluminum layer, then wound precisely into innovative EVOLUTION winding geometry and then potted by hand into special casings.
The MCap® Classic series has formed the basis of the Mundorf audio film capacitors since 1990. Avoiding additional housing, the simple printing method and the classic longitudinal structure make it possible to create our most compact and cost-effective MKP-types.
Very soon after its market launch in 1992, the MCap® SUPREME Classic has been internationally acclaimed as a top-class capacitor. Today it is considered by many users as a milestone in the modern audiophile capacitor generation.
The MCap EVO Oil combines the magic of the MCap EVO‘s sound characteristics with the acoustic advantages of oil-impregnated capacitors.
The bipolar electrolytic capacitors of the ECap AC Audio Coupling & Signal Cap RAW series have foils with surfaces that are roughened by a special etching process, enlarging the surface. As the capacity of capacitors is proportional to their surface, this process provides the smallest and cheapest Mundorf audio capacitors. However, this process also weakens the sound quality comparing to non-etched versions.
Mundorf’s coils are divided into four kinds: Copper foil, Feron core coils in combination with copper wire, Solid copper wire with ferrite core, and Air core copper coils.
MCoil Foil coils are wound layer by layer and are of particularly low-capacitive, even though their similarity to our foil wound capacitors would suggest otherwise. Their unique performance quality unites the tonal virtues of OFC Copper foil with the clarity and precision generally typical for all air-core coils, alongside the authenticity of a tightly cemented reel which is practically microphonic-free.
MCoil iCore Coils combine both the typical low basic output distortions and the low internal resistance of Feron core coils with the enhanced dynamic in music performance of copper wire featuring our Baked Wire Treatment.
MCoil Foil coils are wound layer by layer and are of particularly low-capacitive, even though their similarity to our foil wound capacitors would suggest otherwise. Ferrite Cores are sintered from a metal-plastic-powder.
MCoil AirCores made from massive copper round-wire has been specially developed for high-quality loudspeakers, which focus on achieving an utmost natural, detailed, and acoustically balanced music performance.
At SoundImports we offer 3 types of cross-over resistors from Mundorf, 5W and 10W metal oxides, and their excellent 20W Supreme.
In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favored whenever impulse speed is required, e.g. in the medium/high-frequency range. The versions SoundImports offer has a continuous load capacity of two and a half, five, or ten watts. In the impulse range, however, they are much higher continuous load capacity. Available for 5 and 10 Watts.
With Mundorf’s MResist SUPREME you can enjoy even the finest details and spatial information which normally gets lost. Due to the complex bifilar structure from 1Ω with two wires being wound around the high-temperature-resistant cement element simultaneously the inductance is always below 75µH.