• Incl.Excl.
  • Customer Support



      Lepai LP210PA Mini Plate Amplifier

      € 86,74€ 104,95 10+ In stock
      • -5% Order 4 for only € 99,70 per piece

      Buy now, pay later

      • 24h express shipping available
      • Same day shipping
      • In-house technical support
      • 45 days worry-free returns
      Request quotation
      Do you have a question about this product?

      Do you have a question about this product?

      Our employee is happy to help you find the right product

      Product description

      The Lepai LP210PA is the ideal Class D plate amplifier for powering smaller 2.1 speaker systems. This compact plate amplifier can provide 30 watts x 2 to the full range outputs and 60 watt to the mono subwoofer channel for powerful output capability. The adjustable crossover frequency, sub volume, and main speaker volume makes it easy to create a smooth transition from a subwoofer to satellite speakers.



      • Compact size (4.5" x 5" x 1") for installation into the smallest subwoofer enclosures
      • Satellite outout includes 6 dB per octave high pass at 100 Hz
      • Perfect for use in office, bedroom, or even portable speaker systems
      • Defeatable full range output for use as just a subwoofer amplifier
      • The full range speaker output uses high quality binding posts for easy connection


      Product details

      Lepai LP210PA 2x30W + 60W 2.1 Channel Mini Plate Amplifier TPA3118


      Lepai's LP210PA compact 2.1 plate amplifier makes it easy to create your own powered subwoofer/satellite speaker systems. At only 4.5" wide and 5" tall, you can install this amplifier in even the smallest subwoofer designs; however with 60 watts to the subwoofer and 30 watts to each satellite you can expect powerful output capability. This is the perfect plate amplifier for use in office, bedroom, or even portable subwoofer/satellite speaker systems.


      The straightforward features make the LP210PA extremely easy to connect and setup. Input is handled through stereo RCA connectors. For the power outputs, there is a Phoenix connector on the back of the amplifier to connect directly to your subwoofer driver, along with binding posts on the front of the plate for simple connection to a pair of separate satellite speakers. The adjustable subwoofer volume, crossover frequency, and main speaker volume makes it easy to create a smooth transition between the subwoofer and satellite speakers. In addition, this amplifier includes a unique channel selection switch, which allow you to turn off the satellite speakers and run just the subwoofer by itself allowing you to run separate powered satellites from the stereo RCA pass through outputs.


      Note: Power supply not included.

      Show more


      Article number
      Rated power output
      2 x 30 watts + 1 x 60 watts
      Rated power output bridged
      Minimum load
      4 ohms
      Signal-to-noise ratio (SNR)
      Distortion bridged
      Amplifier classification
      Class D
      Circuit topology
      TPA3118 based
      Frequency response
      20 - 20,000 Hz
      Input impedance
      Input sensitivity
      245 mV
      Auto turn-on sensitivity
      Maximum sampling rate
      Speaker output channels
      Analog in/out
      S/PDIF in/out
      AES/EBU in/out
      Coaxial in/out
      RCA in/out
      XLR in/out
      Jack in/out
      USB connection
      Network connection
      Subwoofer pre-out
      Auto on/off
      Remote control
      App control
      Equalizer (EQ) adjustment
      Equalizer (EQ) profiles
      Phase control
      Crossover frequency adjustment
      Control software
      Windows/Mac compatible
      Power requirements
      15 - 22 VDC
      Power inlet connector
      2.1 x 5.5 mm plug
      Standby power consumption
      Current limit
      Under/over voltage protection
      Dimensions (H x W x D)
      159 x 114 x 102 mm
      Cutout dimensions
      104.76 x 95.25 mm

      Show more


      5 from 5Based on 7 reviews
      Review this product
      5 of 5
      Excellent. Fixed 100Hz LP filter on satellites. Sub controls do what they say. Low noise on a power brick after adding a series choke 300mH and 1000uF cap. No trouble with Tang Band 4R 8" and Morel mid/highs. I would use these on my dual AV subs if that amp ever fails.
      By keith h. on 17 December 2021
      4 of 5
      I have had a few more days testing this plate amp and I thought I would share some thoughts. I had a lot of fun building a small sub with this which turned out great. Combined with a pair of small bookshelves i bought many years ago it is perfect. However when I paired it with a pair of Dali Sektor 2, the highpass filter took alot away from the dalis. I believe there is a 100hz highpass filter. Perhaps this is a good thing for you, but I would not pair this amp with just any speaker. Also there is a slight self noise if you set the volume on the amp higher than 12 o clock (which really should not be necessary og all but the most unefficient speakers). I am using an old laptop power supply that is near the max this amp can take. All in all I am quite happy whith this for the price, and it was a fun project. I might be a bit critical as my main listening system is b&w cm9 with a rotel rb 1582 amp.
      By Tomas M. on 11 October 2020
      Show more
      LP210PA Mini Plate Amplifier
      € 86,74
      € 104,95
      LP210PA Mini Plate Amplifier
      10+ In stock
      Add to cart
      Compare 0

      Add another product (max. 5)

      Start comparison

      By using our website, you agree to the usage of cookies to help us make this website better. Hide this messageMore on cookies »