The Lundahl LL1623-90 is a high-quality open-frame output transformer for tube amplifiers, designed for 90 mA single-ended operation with wide bandwidth and low leakage inductance.
Highlights of the Lundahl LL1623-90
- Output transformer for tube amplifiers with 90 mA recommended DC operating point
- Special Lundahl audio C-core with air gap for single-ended tube output stages
- Highly sectioned winding structure for minimum leakage inductance
- Frequency response example of 7 Hz to 25 kHz ±0.5 dB in LL1623 / 90 mA connection alt. C
Product details Lundahl LL1623-90
Lundahl LL1623-90 Output Transformer for Tube Amplifiers 90 mA
The Lundahl LL1623-90 is built for tube amplifiers and uses the LL1623 winding and core platform with a 90 mA single-ended air gap. Its special audio C-core is designed to handle the required DC current while maintaining the headroom needed for the audio signal.
A highly sectioned winding layout with harmonically sized sections helps minimize leakage inductance. Combined with Lundahl’s low-capacitance coil winding technique, this makes the LL1623-90 suitable for wide-bandwidth audio components where clean transformer performance is essential.
For the LL1623 / 90 mA version in connection alternative C, with 650 ohms source resistance and an 8 ohm load, the transformer achieves a frequency response of 7 Hz to 25 kHz ±0.5 dB. Phase shift is 2° at 20 Hz and 13.5° at 20 kHz, with a group delay of 2.2 μs at 20 kHz.
The LL1623-90 has an open-frame construction for mounting inside an amplifier housing. It weighs 2.5 kg, uses a 5.08 mm pin spacing module, and provides 3 kV isolation between primary and secondary windings and 1.5 kV isolation between windings and core.
Show more
Show less