Customer Support



    Dayton Audio DTA-PRO 100W Class D Bluetooth Amplifier with USB DAC IR Remote and Sub Output

    € 181,78€ 219,95 1 In stock: delivery time 1-4 business days
    • Shipping always fully insured and with track & trace
    • Low international shipping rates
    • Same day shipping*
    • In-house technical support

    Product description

    The Dayton Audio DTA Pro provides a rich feature set including Bluetooth, USB DAC, and even a wireless remote control. With 50 watts per channel at 4 ohms, the DTA-Pro provides enough power to run even the most demanding speakers. High efficiency paired with low THD offers up an impeccably clean, uncolored audio experience.



    • Powerful remote controlled amplifier and DAC all in a small package
    • Several input options: Bluetooth, 3.5 mm, coaxial, optical, and USB
    • Wireless remote controls source input, EQ, and volume
    • High speed 192 kHz/24-bit DAC sampling rate


    Product details

    Dayton Audio DTA-PRO 100W Class D Bluetooth Amplifier with USB DAC IR Remote and Sub Output

    Rediscover your favorite music with the DTA-PRO. This all-in-one amplifier starts with a refined, brushed aluminum case and fills it chock full of features. This powerful 50 watt per channel amplifier offers clean and precise sound with a number of convenient input options. For convenience and usability the DTA-PRO comes equipped with Bluetooth 4.2 with aptX. For the very best in audio quality the DTA-PRO offers an optical / coaxial input capable of 192 kHz/24-bit sampling rate. Other input methods also include USB and a 3.5mm stereo jack.


    Included with the DTA-PRO is a full function wireless remote which allows for total control over the amplifiers number of presets and features including EQ presets, bass / treble adjustment, and even track control when utilizing the Bluetooth or DAC input.


    The DTA-PRO also offers a powerful line level output for connecting a powered subwoofer. At nearly 3 VRMS the subwoofer output provides a powerful signal to give your powered subwoofer the signal it needs to really pound.


    Specifications: Power output: 2 x 50 watts @ 4 ohms • Frequency response: -1.5 dB (20 Hz-20 kHz) • THD+N: 0.09% at 100mV input • Dynamic range: 129 dB at 1 kHz • SNR: -107 dB at 1 kHz • Inputs: USB, digital optical, digital coaxial, stereo 3.5 mm, Bluetooth • Sub level: 2.7VRMS maximum • Sampling bit rate: 192 kHz/24-bit (coaxial and optical), 96 kHz/24-bit (USB) • Electrical requirement: 24V-32V • Minimum input sensitivity: 1.1V • Maximum input sensitivity: 2.5V • Channel separation: -60 dB • Efficiency: 88% • Chipset: SA9023+CS8416+TAS5342A+TAS5508C+DAC PCM1808+NE5532 •  Dimensions: 1.2" H x 5.2" W x 5" D.


    Article number
    Rated power output (RMS)
    2 x 50 Watts at 4 ohms
    Bridged power output (RMS)
    Minimum load
    4 ohms
    Signal-to-noise ratio (SNR)
    -107dB (at 1KHz)
    0.09% at 100 mV input THD+N
    Distortion bridged
    Frequency response
    20 - 20,000 kHz (-1.5 dB)
    20 Kohms (AUX)
    Input sensitivity
    1.1 - 2.5 V
    Auto turn-on sensitivity
    Maximum sampling rate

    Coaxial/optical: 192 kHz / 24 bit
    USB: 96 kHz / 24 bit

    Circuit Topology

    SA9023, CS8416, TAS5342A, TAS5508C
    DAC PCM1808, NE5532

    Amplifier classification
    Speaker output channels
    Subwoofer output channel
    Analog in/out
    Optical S/PDIF in/out
    Coaxial in/out
    RCA in/out
    AUX in/out
    Bus in/out
    XLR in/out
    Memory card slot
    Network connection
    Headphone jack
    Subwoofer pre-out
    check 4.2 aptX
    Banana plug compatible
    Remote control
    App control
    Auto turn-on
    Accepted file formats
    Equalizer (EQ) adjustment
    Equalizer (EQ) profiles
    Multi zone/room
    Crossover frequency adjustment
    150 Hz fixed low pass
    Bridge mode
    Power requirements
    24V - 32 VDC
    Power inlet connector
    DC jack
    Power consumption
    Stand-by power consumption
    Dimensions (D x W x H)
    127 x 132 x 30.5 mm
    Case material
    Brushed aluminum


    5 from 5Based on 4 reviews
    Review this product
    5 van 5
    No description was given
    By David M. on 2 June 2020
    5 van 5
    No description was given
    By jorgen b. on 29 May 2020
    Show more
    DTA-PRO 100W Class D Bluetooth Amplifier with USB DAC IR Remote and Sub Output
    € 181,78
    € 219,95
    DTA-PRO 100W Class D Bluetooth Amplifier with USB DAC IR Remote and Sub Output
    1 In stock: delivery time 1-4 business days
    Add to cart
    Compare 0

    Add another product (max. 5)

    Start comparison

    By using our website, you agree to the usage of cookies to help us make this website better. Hide this messageMore on cookies »