The Dayton Audio DC160-4 is a 165 mm 4 ohm Classic woofer designed to deliver solid bass, clean midrange response, and strong value in sealed, vented, or transmission line speaker systems.
Highlights of the Dayton Audio DC160-4
- Sturdy round steel frame that is easy to countersink
- 4 ohm impedance for flexible load options
- Coated paper cone for smooth response and reduced cone breakup
- Aluminum voice coil former and vented pole piece for high power handling
- Large flat spider and 3.4 mm Xmax for clean bass performance
- Suitable for sealed, vented, or transmission line enclosures
Product details Dayton Audio DC160-4
Dayton Audio DC160-4 165 mm Classic Woofer Speaker 4 Ohm
The Dayton Audio DC160-4 is a dependable choice for DIY audio components projects where strong low-frequency output and clear midrange are both important. As a 4 ohm bass-midwoofer, it offers alternative load possibilities and works well in compact loudspeaker designs.
A treated, non-pressed paper cone combines with a rubber half-roll surround to promote smooth response and controlled cone behavior. The coated cloth dust cap, sturdy steel frame, and ferrite motor construction give this woofer the practical build quality needed for repeatable installation and reliable performance.
For power handling and bass control, the DC160-4 uses an aluminum voice coil former, a vented pole piece, and a large diameter flat spider. With 60 watts RMS power handling, 88.3 dB sensitivity, 39 Hz resonance frequency, and a usable frequency range of 30 to 4,000 Hz, it is suitable for both bass and lower-midrange duties in compatible speaker systems.
The driver supports sealed, vented, and transmission line enclosure designs. Typical enclosure references include 0.23 ft³ sealed for an F3 of 73 Hz, or 0.48 ft³ vented for an F3 of 45 Hz. Key parameters include 3.4 ohms Re, 0.99 mH Le at 1 kHz, 0.43 Qts, 15 liters Vas, 7.02 Tm BL, and 3.4 mm Xmax.