• BlieSMa T34A-4 Aluminium-Magnesium Dome Tweeter Matched Pair
  • BlieSMa T34A-4 Aluminium-Magnesium Dome Tweeter Matched Pair
  • BlieSMa T34A-4 Aluminium-Magnesium Dome Tweeter Matched Pair

BlieSMa T34A-4 Aluminium-Magnesium Dome Tweeter Matched Pair

The Bliesma T34A-4 1-1/2" Aluminium-Magnesium tweeter belongs to the absolute best of this market. The extremely lineair frequency response and its amazing wide dispersion is unmatched by any other tweeter. The large surface area combined with a Peak to P
Article number:
T34A-4
Delivery time:
Delivery time: 1-4 business days
Availability:
In stock (2)
Reviews:
Buy 4 for €598,45 each and save 5%

€629,95 .
Incl. tax
Tweeter Type: Corundum Dome
Tweeter Series:
Cone / Dome Diameter: 1-1/4"
Power Handling (RMS): 80 Watts
Power Handling (max):
Impedance: 4 ohms
Sensitivity: 96 dB 1W/1m
Frequency Response: 1,300 to 30,000 Hz
Resonant Frequency (Fs): 790 Hz
DC Resistance (Re): 3.3  ohms
Voice Coil Inductance (Le): 0.008 mH
Overall Outside Diameter:
Cutout Diameter:
Depth:
Angle:
Mounting Type:
Exit Diameter:
Diaphragm Material:
Recommended cut frequency:

The Bliesma T34A-4 1-1/2" Aluminium-Magnesium tweeter belongs to the absolute best of this market. The extremely lineair frequency response and its amazing wide dispersion is unmatched by any other tweeter. The large surface area combined with a Peak to Peak excursion of 3mm gives this tweeter the ability to be safely used down to 1300Hz!

 

Highlights

  • 34 mm aluminium-magnesium alloy dome with variable thickness for 27 kHz first breakup mode
  • Extremely low moving mass for better transient response and higher efficiency
  • Fully saturated neodymium motor with copper sleeve for low non linear and modulation distortion
  • 3 mm linear excursion (P-P) and large vent channel for undistorted low frequency operation
  • Narrow surround for less "soft dome" coloration
  • Flush mounted surround and rear mounted magnet system for flat frequency response and wide off-axis response
  • No ferrofluid for improved dynamics
  • Underhung voice coil wound on titanium former
  • Flexible and lightweight lead wires made in Denmark
  • Thick aluminium powder coated flange
  • Aluminium rear chamber with natural wool damping
  • Extremely wide recommended frequency range 1.3 kHz-35 kHz

 

Product Details

Bliesma T34A-4 1-1/2" Aluminium-Magnesium tweeter

 

The Bliesma T34A-4 tweeter was designed to be something new and extraordinary. It delivers all you want of a large dome, but still has the features that we desire from a small dome.. The engineer of this tweeter knew exactly what he was doing and used the Aluminium-magnesium dome to its full potential. Which resulted in a very lineair frequency plot and a wide dispersion This tweeter also features an amazing low-end extension! The large surface area plus big excursion makes it possible to cross the tweeter as low as 1300Hz!

 

This not only opens up a lot of options when you are deciding what woofer you are going to match with this tweeter, it also makes creating a crossover that much easier, as you have almost complete freedom over where to place the crossover.It’s extremely high sensitivity helps reducing Power compression and creating a high-sensivity speaker.

 

 

PRODUCT SPECIFICATIONS

Tweeter Type

Corundum Dome

Cone / Dome Diameter

1-1/4"

Impedance

4 ohms

Power Handling (RMS)

80 Watts

Frequency Response

1,300 to 30,000 Hz

Sensitivity

96 dB 1W/1m

 

THIELE-SMALL PARAMETERS

Resonant Frequency (Fs)

790 Hz

DC Resistance (Re)

3.3  ohms

Voice Coil Inductance (Le)

0.008 mH

Mechanical Q (Qms)

2.1

Electromagnetic Q (Qes)

0.42

Total Q (Qts)

0.35

Maximum lineair excursion (Xmax)

1,5 mm

Surface Area of Cone (Sd)

10.5 cm2

Diaphragm Mass Inc. Airload (Mms)

0.28g

 

[DOCUMENTS] 

 Datasheet T34A-4

0 stars based on 0 reviews Add your review
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »