Kundenservice
0
Sluiten

Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil

€ 190,04€ 229,95 2 Auf Lager: Lieferzeit 1-3 Werktage
Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.... Mehr anzeigen
Bulk discount Genießen Sie diese tollen Rabattangebote
  • -5% Kauf 4 für nur €218,45 pro stück
  • Versicherter Versand mit Sendungsverfolgung
  • Kostenloser Versand ab 149€ (DE, A)
  • Versand am selben Tag*
  • Hausinterner technischer Support

Produktbeschreibung

Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.

 

Highlights

  • Dual 2 ohm, 2-layer copper voice coils
  • Large vented pole piece and under-spider venting
  • 500 watts RMS power handling
  • Black anodized aluminum former and black pole improves heat dissipation
  • Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber
  • Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area
  • Dual linear stiffness spiders limit distortion and rocking modes

 

Product details

Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil

 

If you want outrageous amounts of bass, you gotta move some air

The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.

 

The versatility you need for mobile, home, or pro subwoofer excellence

Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.

 

Built to produce massive low frequency output and keep on doing it

To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.

Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.

 

A strong motor takes you to wherever you want to be

A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.

Cabinet recommendations:

  • Sealed 0.63 cubic ft. (net internal), f3 of 45 Hz with a 0.707 Qtc alignment
  • Vented 1.75 cubic ft. (net internal, not including driver or port volume) tuned to 25 Hz with a 10" wide by 1" high slot port that is 24" long, which yields an f3 of 23 Hz

 

Note: All parameters derived with voice coils wired in series.



Eigenschaften

Artikelnummer:
UM10-22
Woofer Series
Ultimax Series
Woofer Type
Subwoofer
Power Handling (RMS)
500 watts
Power Handling (max)
1,000 watts
Impedance
2+2 ohms
Sensitivity
84.8 dB @ 2.83V/1m
Frequency Response
25 - 1,500 Hz
Voice Coil Diameter
63.5 mm
DC Resistance (Re)
3.2 ohms
Voice Coil Inductance (Le)
1.28 mH @ 1 kHz
Resonant Frequency (Fs)
26.9 Hz
Mechanical Q (Qms)
3.08
Electromagnetic Q (Qes)
0.59
Total Q (Qts)
0.49
Diaphragm Mass Inc. Airload (Mms)
227g
Mechanical Compliance of Suspension (Cms)
0.15 mm/N
Surface Area of Cone (Sd)
327.8 cm²
Volume of Displacement (Vd)
622.8 cm³
BL Product (BL)
14.5 Tm
Compliance Equivalent Volume (Vas)
23.5 liters
Maximum Linear Excursion (Xmax)
19 mm
Cone / Diaphragm Material
Nomex Cone
Surround Material
Rubber
Voice Coil Wire Material
Copper
Voice Coil Former
Aluminum
Dual Voice Coil
Yes
Basket / Frame Material
Cast Aluminum
Magnet Material
Ferrite
Overall Outside Diameter
273.5 mm
Overall Depth
178 mm
Baffle Cutout Diameter
236.7 mm
Sealed Volume
0.63 cubic ft. (net internal)
Sealed F3
45 Hz with a 0.707 Qtc alignment
Vented Volume
1.75 cubic ft. (net internal, not including driver or port volume) tuned to 25 Hz with a 10" wide by 1" high slot port that is 24" long
Vented F3
23 Hz

Bewertungen

5 from 5Based on 2 reviews
Produkt bewerten
5 van 5
Using it in a small (25l) sealed box with Monacor SAM500D, connected to an Onkyo TX-RZ740 AVR, doing some trickery with bass management.
This thing is absolutely brutal, yet the sound is so nice to listen to. With some EQ and enough power this thing will go incredibly low and doesn't even need a big box.

Mine had a manufacturing defect, though - too much glue on the spider, which was causing noticable noise. I had to grind it from there.
Durch tk. on 22 März 2020
5 van 5
No description was given
Durch sanmugam b. on 3 Januar 2018

Ergänzende Produkte

Schließen Sie Ihren Einkauf ab

UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil
€ 190,04
€ 229,95
UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil
2 Auf Lager: Lieferzeit 1-3 Werktage
In den Warenkorb legen
Vergleichen 0

Fügen Sie ein anderes Produkt hinzu (max. 5)

Vergleich starten

Durch die Nutzung unserer Webseite stimmen Sie dem Gebrauch von Cookies zur Verbesserung dieser Seite zu. Diese Nachricht AusblendenFür weitere Informationen beachten Sie bitte unsere Datenschutzerklärung. »