• Incl.Excl.
  • Klantenservice



      Amiga MT | DIY Components Pack

      € 140,45€ 169,95 Niet op voorraad: 10 expected on 07-10-2022
      • Voor 16u besteld, vandaag verstuurd
      • Gratis verzending vanaf € 99 (NL & BE)
      • In-house technische support
      • 45 dagen zorgeloos retourneren
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!


      Another popular design by Paul Carmody, the Amiga 2-way tower kit has a small footprint but produces a big sound. This kit has become known as a boutique Hi-Fi killer. This kit is ideal for novice woodworkers, the baffle is pre-cut for the drivers, you just build the enclosure. This kit includes parts to build a single speaker: The drivers, crossover components, and damping material.



      • The Amiga has a detailed yet relaxed sound with surprising low frequency extension
      • Remarkably flat response, ±2.5 dB from 35-20,000 Hz
      • Designed and fine-tuned by expert designer Paul Carmody


      Product details

      Amiga DIY Components Pack


      Basically, if you like the Overnight Sensations, then you'll like the Amigas. The tonal balance is similar with slightly relaxed voicing to allow for long listening sessions without fatigue. However, the quality of the drivers will definitely highlight finer details in any recording. The imaging creates a wide soundstage, as a quality monopole speaker should, with a very tight center image, and sounds seeming to appear around and behind the speakers. The bass extension should definitely surprise; with an F3 of 34 Hz, there is a good chance you can leave the subwoofer turned off for most purposes. The overall sound is big, it is a 2-way that produces like a 3-way.


      The drivers for the Amiga's were chosen for their low distortion and accuracy. The Dayton Audio RS180S-8 bass-midwoofer handles frequencies below 2,000 Hz with precision and authority. For the top few octaves Paul chose the Peerless by Tymphany DX25TG59-04 1" dome tweeter for its low Fs and smooth response. This kit includes nearly everything you need to build a top-notch speaker including the drivers, port, damping material, and crossover components.


      Note: Cabinets are not included.



      Toon meer


      5 from 5Based on 2 reviews
      Schrijf een review
      5 van 5
      Really pleased with these, just finished a components only build. Really enjoyed putting these together. SoundImports were really great again, with everything delivered as expected and a few queries I had sorted really quickly. The Amigas sound great, the real supprise is the bass. I did not expect too much given the size of the drivers but was pleasantly surprised. I used to use a sub with my old Eltax floorstanders but with the Amigas it is not really necessary.
      Door Phil Bamforth on 6 April 2021
      5 van 5
      I have build these speakers on a components only basis. So did the cabinets myself. I have build the Overnight Sensation, Speedster, Classix 2 and these. They all sound amazing in their own right but also different. These Amiga’s have the best all round sound but can cause fatigue when compared to the others. Partly because you have to run them on a higher volume. But gosh, when you are in a listening state of mind, these Amiga’s are the best of the lot.
      Door Eelco on 5 December 2020
      Amiga MT | DIY Components Pack
      € 140,45
      € 169,95
      Amiga MT | DIY Components Pack
      Niet op voorraad: 10 expected on 07-10-2022
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »