Klantenservice
0
Sluiten

Categorieën

Filters

    Jantzen Audio 000-6170 | 3,9 mH | 0,07 Ω | 5% | 14 AWG | C-Coil

    € 41,28€ 49,95 4 Op voorraad: levertijd 1 werkdag
    The C-Coil is wound around a toroidal sandwich core, and it has extremely low resistance and can shift a large amount of power without getting over heated. If the stated maximum wattage is not exceeded the core will never saturate. The C-Coil is designed... Toon meer
    Volume voordeel Geniet van deze geweldige kortingsdeals
    • -5% Bestel 4 voor slechts €47,45 per stuk
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd*
    • Gratis verzending vanaf €99
    • In-house technische support

    Productomschrijving

    The C-Coil is wound around a toroidal sandwich core, and it has extremely low resistance and can shift a large amount of power without getting over heated. If the stated maximum wattage is not exceeded the core will never saturate. The C-Coil is designed for the bass section of crossovers and for passive Sub-Woofers.

     

    Highlights

    • Wound with ETP (Electrolytic-Tough-Pitch) C11000 / IACS certified copper wire
    • Toroidal (sandwich) core made from epoxy laminated steel plates
    • All C-Coils are measured after being wound, using a professional CLIO system @ AC 1V 1kHz
    • Not suitable for crossovers with an XO point above 1.20 kHz

     

    Product details

    Jantzen Audio 000-6170 | 3,9 mH | 0,07 Ω | 5% | 14 AWG | C-Coil

     

    The C-Coil is an audio inductor, unique to Jantzen Audio. It is a toroidal core audio inductor with a very high-power handling and extremely low resistance (RDC). The extremely high-power handling makes it the ultimate inductor for the bass section for certain crossover design. Wound on a toroidal sandwiched steel core and using shrink foil to reduce microphonic effect. The C-Coil is specifically designed for the bass section for crossovers and is not recommended for the mid-range or tweeter section.

     

    All Jantzen Audio inductors, both wire and foil based are made with copper that is in accordance with ETP (Electrolytic-Tough-Pitch) C11000 and an IACS certification of a minimum of 100% conductivity. C11000 copper has a guaranteed purity of 99.9% or higher. The copper purity will often be higher, but 99.9% is the margin which our suppliers of copper wire and copper foil will guarantee as a minimum. The oxygen content of ETP C11000 certified copper is between 0.02 and 0.04%.

     

    Specifications: Power handling: 1500 Watt RMS • Inductance tolerance: +/- 5% • Resistance (RDC) tolerance: +/- 10%.

    Specificaties

    Artikelnummer
    000-6170
    Inductance
    3.9 mH
    DCR
    0.07 ohms
    Tolerance
    5%
    Wire diameter
    14 AWG
    Power handling (RMS)
    700 Watts
    Dimensions: Ø * H (mm)
    92 x 30

    Reviews

    0 from 5Based on 0 reviews
    Schrijf een review

    Er zijn nog geen reviews geschreven over dit product..

    Gerelateerde producten

    Maak uw aankoop compleet

    000-6170 | 3,9 mH | 0,07 Ω | 5% | 14 AWG | C-Coil
    € 41,28
    € 49,95
    000-6170 | 3,9 mH | 0,07 Ω | 5% | 14 AWG | C-Coil
    4 Op voorraad: levertijd 1 werkdag
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »