• Incl.Excl.
    BTW
  • Klantenservice
    0
    Sluiten

    Categorieën

    Filters

      Jantzen Audio 000-6085 | 2,2 mH | 0,06 Ω | 5% | 14 AWG | C-spoel

      € 39,63€ 47,95 6 Op voorraad
      • -5% Bestelling 4 voor slechts € 45,55 per stuk

      Buy now, pay later

      • Gratis verzending vanaf € 99 (NL & BE)
      • Voor 16u besteld, vandaag verstuurd
      • In-house technische support
      • 45 dagen bedenktijd voor retourneren
      Zakelijke offerteaanvraag
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!

      Productomschrijving

      The C-Coil is wound around a toroidal sandwich core, and it has extremely low resistance and can shift a large amount of power without getting over heated. If the stated maximum wattage is not exceeded the core will never saturate. The C-Coil is designed for the bass section of crossovers and for passive Sub-Woofers.

       

      Highlights

      • Wound with ETP (Electrolytic-Tough-Pitch) C11000 / IACS certified copper wire
      • Toroidal (sandwich) core made from epoxy laminated steel plates
      • All C-Coils are measured after being wound, using a professional CLIO system @ AC 1V 1kHz
      • Not suitable for crossovers with an XO point above 1.20 kHz

       

      Product details

      Jantzen Audio 000-6085 | 2,2 mH | 0,06 Ω | 5% | 14 AWG | C-Coil

       

      The C-Coil is an audio inductor, unique to Jantzen Audio. It is a toroidal core audio inductor with a very high-power handling and extremely low resistance (RDC). The extremely high-power handling makes it the ultimate inductor for the bass section for certain crossover design. Wound on a toroidal sandwiched steel core and using shrink foil to reduce microphonic effect. The C-Coil is specifically designed for the bass section for crossovers and is not recommended for the mid-range or tweeter section.

       

      All Jantzen Audio inductors, both wire and foil based are made with copper that is in accordance with ETP (Electrolytic-Tough-Pitch) C11000 and an IACS certification of a minimum of 100% conductivity. C11000 copper has a guaranteed purity of 99.9% or higher. The copper purity will often be higher, but 99.9% is the margin which our suppliers of copper wire and copper foil will guarantee as a minimum. The oxygen content of ETP C11000 certified copper is between 0.02 and 0.04%.

       

      Specifications: Power handling: 1500 Watt RMS • Inductance tolerance: +/- 5% • Resistance (RDC) tolerance: +/- 10%.

      Toon meer

      Specificaties

      Artikelnummer
      000-6085
      Inductie
      2.2 mH
      Gelijkstroomweerstand
      0.06 ohms
      Tolerantie
      5%
      Draaddiameter
      14 AWG
      Belastbaarheid
      700 Watts
      Afmetingen Ø * H (mm)
      83 x 26

      Toon meer

      Reviews

      0 from 5Based on 0 reviews
      Schrijf een review

      Er zijn nog geen reviews geschreven over dit product..

      000-6085 | 2,2 mH | 0,06 Ω | 5% | 14 AWG | C-spoel
      € 39,63
      € 47,95
      000-6085 | 2,2 mH | 0,06 Ω | 5% | 14 AWG | C-spoel
      6 Op voorraad
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »