Klantenservice
0
Sluiten

Categorieën

Filters

    Hypex FA123 2 x 125 + 100 Watt FusionAmp

    € 371,86€ 449,95 >10 Op voorraad: levertijd 1 werkdag
    The FA123 2x125 +100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.... Toon meer
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd*
    • Gratis verzending vanaf €99
    • In-house technische support

    Productomschrijving

    The FA123 2x125 + 100 Watt FusionAmp is a DSP controlled three channel plate amplifier. It can be the basis of a powerful active two- or three-way speaker.

     

    Highlights

    • Ncore based amplifier technology
    • DSP controlled
    • All-in-one Hypex Solution
    • Neutral and transparent reproduction

     

    Product details

    Hypex FA123 2x125 +100 Watt FusionAmp

     

    Due the combination of SMPS, DSP and Ncore based amplifiers packed in this plate amplifier, FusionAmp is one of the best amplification solutions available for active speaker designs. The integrated DSP provides great audio processing functionality. Thanks to the Ncore technology distortion (THD and IMD) over the full audio and power range is negligible. Distortion at listening levels (1W) is unmeasurable.

     

    The FA123 has two 125 watt Ncore amplifiers which can also be bridged to form one powerful 250 watt amplifier. The third channel is 100 watt Ncore tweeter channel. A variety of input options ensure compatibility with most source equipment. Hypex provides their HFD (Hypex Filter Design) software to design and configure filters for the FusionAmp. You can easily add functionality to the FusionAmp with the Fusion Remote Kit for remote controllability. Due to thermal regulation these FusionAmp's are not airtight.

     

    To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. You can download the HFD software here.

     

    Features

    • 15 biquads per amplifier
    • Three selectable presets for filters
    • Source selection
    • Signal detect
    • Auto shutdown
    • BTL capable
    • Clip protect
    • Thermal protect
    • Filter protection

     

    What’s in the box?

    • FA123 FusioAmp
    • A printed copy of the user guide
    • Speaker connection cables
    • EU (or UK) C13 Power cable

     

    Curious about designing an active speaker with DSP using Hypex Fusion amplifiers? – Check out our blog post with a “step by step” guide!

    Specificaties

    Artikelnummer
    FA123
    Rated power output

    2 x 125 watts + 1 x 100 watts at 4 ohms
    2 x 75 watts + 1 x 100 watts at 4 ohms at 8 ohms
    2 x 115 watts at 2 ohms + 1 x 100 watts at 4 ohms

    Bridged rated power output (RMS)

    1 x 200 watts at 4 ohms
    1 x 250 watts at 8 ohms

    Minimum load
    2 ohms (4 ohms for tweeter channel)
    Signal-to-noise ratio (SNR)
    118 dB
    Distortion
    0.0015 % THD+N (10-20,000 Hz at 0.5 x rated power output)
    Distortion bridged
    -
    Amplifier classification
    Class D
    Circuit topology
    Ncore®
    Efficiency
    92 % at full power
    Frequency response
    10 - 50,000 Hz
    Input impedance

    54k ohms (unbalanced RCA)
    44k ohms (balanced XLR DM)
    2.2m ohms (balanced XLR CM)

    Input sensitivity
    1.17 Vrms for rated power output
    Auto turn-on sensitivity
    -
    DSP
    check
    DAC
    check
    Maximum sampling rate

    192 kHz
    96 kHz (optical)

    Speaker output channels
    3
    Analog in/out
    1/1
    S/PDIF in/out
    2/1
    AES/EBU in/out
    1/1
    Coaxial in/out
    1/1
    RCA in/out
    1/ -
    XLR in/out
    2/2
    Jack in/out
    - / -
    USB connection
    check configure port only
    Network connection
    -
    Bluetooth
    -
    Subwoofer pre-out
    -
    Auto on/off
    check
    Remote control
    check (sold separately)
    App control
    -
    Equalizer (EQ) adjustment
    check
    Equalizer (EQ) profiles
    check
    Phase control
    check
    Crossover frequency adjustment
    check
    Presets
    check
    Control software
    Hypex Filter Design
    Windows/Mac compatible
    check / -
    Power requirements
    200-240 VAC ±10%
    Power inlet connector
    IEC C14
    Standby power consumption
    -
    Current limit
    12.5 A
    Under/over voltage protection
    check
    Dimensions (H x W x D)
    360 x 120 x 55 mm
    Cutout dimensions
    336 x 96 mm

    Reviews

    5 from 5Based on 3 reviews
    Schrijf een review
    5 van 5
    Ok, I expected something good and an improvement, but the way these have improved the sound from my speakers surpasses all expectations. The low distortion characteristic and clean/transparet sound is simply phenomenal. Too bad you can't get this product in a non-plate version, because that is how I am forced to use these, but there is a way aroin that too. Communication between pc and plate and plates among themselves was a bit quicky on some occasions, but only when laptop conncected.
    Door Woodhouse on 11 Februari 2021
    5 van 5
    Good
    Door alfio g. on 31 Oktober 2020
    Toon meer

    Gerelateerde producten

    Maak uw aankoop compleet

    FA123 2 x 125 + 100 Watt FusionAmp
    € 371,86
    € 449,95
    FA123 2 x 125 + 100 Watt FusionAmp
    >10 Op voorraad: levertijd 1 werkdag
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »