• Incl.Excl.
    BTW
  • Klantenservice
    0
    Sluiten

    Categorieën

    Filters

      Dayton Audio Epique E180HE-44 Subwoofer

      € 123,93€ 149,95 >10 Op voorraad: levertijd 1 werkdag
      Volume voordeel Geniet van deze geweldige kortingsdeals
      • -5% Bestel 4 voor slechts €142,45 per stuk
      • Verzending altijd verzekerd en met track & trace
      • Voor 16u besteld, vandaag verstuurd
      • Gratis verzending vanaf €99
      • In-house technische support
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!

      Productomschrijving

      Dayton Audio's ground breaking Epique E180HE-44 7" carbon fiber cone dual voice coil woofer is engineered to produce premium performance with controlled response. Thanks to its revolutionary MMAG dual gap motor, the motor force is nearly constant even when driven to the limits of its 14 mm Xmax. Capable of unheard-of excursion for its size while delivering smooth response with low distortion, the E180HE-44 woofer gives you the opportunity to create systems that provide extraordinary accuracy and fidelity.

       

      Highlights

      • Patented dual gap MMAG motor design allows exceptional linearity for minimal distortion
      • Lightweight damped carbon fiber cone delivers remarkably smooth response up to 45 degrees off axis
      • Incredibly linear 14 mm excursion to produce class leading low frequency extension and control
      • Extensive inductance control extends high frequency response and helps lower distortion
      • Substantial venting keeps the voice coil cool to minimize power compression
      • Dual 4 ohm voice coils enable a variety wiring configurations and flexibility
      • Incredible versatility, premium performance as a subwoofer or woofer in 2-way designs

       

      Product details

      Dayton Audio Epique E180HE-44 7" DVC MMAG Extended Range Subwoofer 4 Ohm per Coil

      Combining world class performance with a reasonable cost, the Epique E180HE-44 7" carbon fiber cone woofer from Dayton Audio sets a new standard in versatility, distortion, and response for small speakers. This dual voice coil driver uses a patented MMAG dual gap motor assembly for unmatched linear excursion capability to create compact systems with more bass output and lower distortion than ever. Featuring a carbon fiber cone, dual voice coils, custom tooled suspension, FEA optimized motor, cast aluminum frame, ample venting, and extensive induction control, the E180HE-44 pushes the limits of performance for a 7" driver. Capable of exceptional performance in everything from small subwoofers to 2-way designs, this versatile driver will redefine what is possible from compact speaker systems.

       

      MMAG motor assembly - like no other

      MMAG = Multiple Magnet Air Gap

      The heart of the E180HE-44 is the patented MMAG dual gap motor assembly. This unique design uses 2 top plates spaced between 6 smaller bucking magnets creating a longer magnetic gap with more consistent flux than more common dual gap arrangements. The combination of the MMAG motor and the underhung voice coil gives the E180HE-44 zero loss of motor force (Bl) even when driven to 10 mm of excursion, and an overall excursion capability of over 14 mm (at 70% Bl). This incredible excursion capability allows extremely low harmonic and intermodulation distortion to ensure remarkably clean output even when driven to high output levels. Furthermore, the motor includes extensive induction control to lower Le and improve high frequency response.

       

      Carbon fiber is all about performance

      The rigid carbon fiber cone gives the E180HE-44 a unique look while offering a number of performance advantages. With one of the highest strength to weight ratios of readily available materials, carbon fiber keeps the moving mass to a minimum enabling extended low frequency extension without sacrificing efficiency. The woven cone has excellent damping properties which keeps unwanted resonances under control for incredibly smooth response all the way up to 3,000 Hz. Optimized cone and dustcap profiles make sure that there is no deformation when exposed to high stress so the smooth response and low distortion remains consistent even when pushed to high output levels. Finally, the outside edge of the cone has been reinforced to further control cone breakup and help maintain controlled off axis dispersion.

       

      High excursion requires flexible suspension

      When designing the E180HE-44, Dayton Audio paid extra attention to optimize the suspension to guarantee unrestricted excursion without limiting performance. The large roll rubber surround was custom tooled for high excursion while paying extra attention to the profile to avoid limiting off axis dispersion. A filleted inside edge helps to add extra damping to the cone while reducing reflection from the high roll surround to further improve higher frequency response. A large diameter progressive spider helps keep the cone linear when driven to high excursion without restriction. In addition, the tinsel leads have been woven into the spider on opposing sides to keep mass and compliance displaced evenly across the spider.

       

      Extensive venting helps displace unwanted heat

      Excess heat build up will increase resistance and cause significant power compression and even failure. The force air across the voice coil and keep everything cool the E180HE-44 has extensive cooling. Another advantage of this MMAG motor assembly is the open spaces between the bucking magnets which allow unrestricted airflow directly into the center of the magnetic gap. With this open layout cool air is pulled directly across the voice coil to remove heat more efficiently than more common motor designs. Also the E180HE-44 includes a vented voice coil former, 3 large peripheral gap vents, and unrestricted airflow under the spider to make sure that every component has fresh air moving across it to keep temperatures at a minimum even when pushed hard for long periods.

       

      Cast aluminum frame holds everything together

      In order to support its massive motor assembly while providing a solid mounting surface, the E180HE-44 uses a rugged cast aluminum frame. The minimalistic design of the frame eliminates unwanted reflections and provides ample airflow for the rear of the cone. With plenty of space behind the spider makes sure that you can push the limits of excursion without bottoming out. Being a non-magnetic material, the aluminum frame has no effect to the magnetic field allowing the motor to effortlessly perform exactly as designed. As an added bonus aluminum is an excellent conductor of heat to further assist in cooling.

       

      Note: This is a dual voice coil driver with 4 ohms per voice coil. Specs have been measured with the voice coils wired in series.

      Specificaties

      Artikelnummer
      E180HE-44
      Woofer series
      EPIQUE by Dayton Audio
      Woofer type
      Extended Range Subwoofer
      Nominale diameter
      7"
      Belastbaarheid (RMS)
      200 Watts
      Belastbaarheid (max)
      400 Watts
      Impedantie (Z)
      8 Ohms
      Gevoeligheid
      83.7dB 2.83V/1m
      Frequentierespons
      25 to 3,000Hz
      Spreekspoeldiameter
      1.5"
      Gelijkstroomweerstand (Re)
      6.8Ω
      Spreekspoelinductie (Le)
      1.5mH
      Resonantiefrequentie (Fs)
      35Hz
      Mechanische Q (Qms)
      2.93
      Elektrische Q (Qes)
      0.54
      Totale Q (Qts)
      0.46
      Bewegende massa (Mms)
      32.5g
      Compliantie van de ophanging (Cms)
      0.61mm/N
      Effectief oppervlak (Sd)
      136.1cm²
      Krachtsfactor (BL)
      9.6T·m
      Equivalentvolume (Vas)
      0.57ft³
      Maximale excursie (Xmax)
      14.7mm
      Cone / Diaphragm Material
      136.1cm²
      Surroundmateriaal
      Santoprene®
      Spreekspoel vormermateriaal
      Aluminum
      Mand- /framemateriaal
      Cast Aluminum
      Magneetmateriaal
      Ceramic Ferrite
      Totale buitendiameter
      7.125"
      Totale diepte
      4.375"
      Montagegatdiameter
      6.1"
      # Bevestigingsgaten
      6
      Diameter bevestigingsgaten
      6.625
      Gesloten volume
      0.3ft³
      Gesloten F3
      62Hz
      Gepoort volume
      0.8ft³
      Gepoort F3
      30Hz

      Toon meer

      Reviews

      0 from 5Based on 0 reviews
      Schrijf een review

      Er zijn nog geen reviews geschreven over dit product..

      Gerelateerde producten

      Maak uw aankoop compleet

      Epique E180HE-44 Subwoofer
      € 123,93
      € 149,95
      Epique E180HE-44 Subwoofer
      >10 Op voorraad: levertijd 1 werkdag
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »