Dayton Audio DMA45-8 1-1/2" Aluminum Cone Full-Range Driver

    € 9,88€ 11,95 Niet op voorraad: binnen 1 week leverbaar
    Volume voordeel Geniet van deze geweldige kortingsdeals
    • -5% Bestel 4 voor slechts €11,35 per stuk
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd*
    • Gratis verzending vanaf €99
    • In-house technische support


    Dayton Audio's DMA45-8 1.5" high performance full-range driver combines a rigid aluminum cone, powerful dual magnet neodymium motor, and a proprietary open frame to create a state of the art speaker that delivers low distortion, natural response, and amazing high frequency capability. Make the DMA45-8 the first choice for your next smart speaker, portable Bluetooth speaker, or even high output line array design.



    • Excellent high frequency response for true full-range applications
    • Dual neodymium motor to create a symmetrical magnetic field for superb control
    • Remarkably flat full-range response with excellent off axis performance
    • Large copper cap lowers distortion while improving high frequency response
    • Exclusive 8-spoke open frame design provides extensive venting and minimal reflection
    • DIY friendly, oversized mounting flange makes installation simple
    • Matching tunable passive radiators also available!


    Product details

    Dayton Audio DMA45-8 1-1/2" Dual Magnet Aluminum Cone Full-Range Driver 8 Ohm


    Providing high efficiency with low distortion, Dayton Audio's DMA45-8 1.5" aluminum cone full-range is an ideal driver for use in many of today's modern speaker designs. Whether you are designing a portable Bluetooth speaker, sound bar, compact desktop speaker, or even a high output line array the DMA45-8 is the perfect full-range for the job.

    Designed for the highest performance while delivering maximum value, the no compromise design of the DMA45-8 produces true full-range output capability with minimal distortion. The motor uses dual neodymium magnets creating a strong and symmetrical magnetic field providing high efficiency with excellent cone control. The magnet assembly also includes a large copper cap and sleeve to lower inductance and distortion resulting in improved high frequency response. The 2-layer 0.75" voice coil is wound on a vented polyimide former providing excellent heat dissipation for high power handling and low power compression. A rubber surround and large spider keeps the lightweight aluminum cone linear with superb mechanical damping. In addition, the aluminum dust cap is attached directly to the voice coil former to improve high frequency response with terrific off axis performance. Holding everything together is a proprietary 8-spoke frame with an extremely open design that has extensive venting under the spider and ample room for high excursion.

    Furthermore, Dayton Audio designed the frame for all the DMA Series with DIY speaker builders in mind. The oversized mounting flange means that no precision cutouts are necessary. To ensure an easy installation, the terminals are oriented in such a way that no odd cutouts or notches are needed for connector or wire clearance. Finally, the corners have a 1/8" radius, meaning that for flush mounting you can get a perfect fit using any standard 1/4" straight cut router bit.


    Woofer series
    DMA series
    Woofer type
    Nominale diameter
    Belastbaarheid (RMS)
    10 Watts
    Belastbaarheid (max)
    20 Watts
    Impedantie (Z)
    8 ohms
    76.9 dB 2.83V/1m
    150 to 20,000 Hz
    Gelijkstroomweerstand (Re)
    7.0 ohms
    Spreekspoelinductie (Le)
    0.4 mH
    Resonantiefrequentie (Fs)
    151.7 Hz
    Mechanische Q (Qms)
    Elektrische Q (Qes)
    Totale Q (Qts)
    Bewegende massa (Mms)
    Compliantie van de ophanging (Cms)
    0.60 mm/N
    Effectief oppervlak (Sd)
    8.6 cm²
    Krachtsfactor (BL)
    4.26 Tm
    Equivalentvolume (Vas)
    0.002 ft.³
    Maximale excursie (Xmax)
    2.0 mm
    Cone / Diaphragm Material
    Spreekspoel draadmateriaal
    Spreekspoel vormermateriaal
    Kapton® / Polyimide
    Mand- /framemateriaal
    Totale buitendiameter
    1.81" x 1.81"
    Totale diepte
    # Bevestigingsgaten
    Gesloten volume
    0.0018 ft.³
    Gesloten F3
    216 Hz
    Gepoort volume
    0.012 ft.³
    Gepoort F3
    88 Hz


    5 from 5Based on 1 reviews
    Schrijf een review
    5 van 5
    Zeer goede geluidsqualiteit.
    Door Nicola Q. on 24 Oktober 2020

    Gerelateerde producten

    Maak uw aankoop compleet

    DMA45-8 1-1/2"  Aluminum Cone Full-Range Driver
    € 9,88
    € 11,95
    DMA45-8 1-1/2" Aluminum Cone Full-Range Driver
    0 Op voorraad: binnen 1 week leverbaar
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »