• Incl.Excl.
    BTW
  • Klantenservice
    0
    Sluiten

    Categorieën

    Filters

      SMSL HO200 koptelefoon (voor)versterker

      € 347,07€ 419,95 5 Op voorraad
      • -5% Bestelling 4 voor slechts € 398,95 per stuk

      Buy now, pay later

      • Gratis verzonden (NL & BE)
      • Voor 16u besteld, vandaag verstuurd
      • In-house technische support
      • 45 dagen zorgeloos retourneren
      Zakelijke offerteaanvraag
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!

      Productomschrijving

      SMSL HO200 is a fully balanced solid-state desktop headphone amplifier offering up to 3W of output power into a 32ohm load.

       

      Highlights

      • Fully balanced design, 4 ultra-low distortion precision linear feedback circuits (PLFC)
      • The distortion is as low as 0.00006%, and the A-WTD is as low as 0.00005% (-126dB)
      • Ultra-low noise power supply design, so that the output noise is as low as 1.0uV, SNR up to 140dB 
      • High output power, 16 ohm output power up to 6W, 32 ohms up to 3W;
      • The specially designed volume potentiometer greatly reduces channel deviation;
      • 3 gears gain control, the low gain is specially optimized for IEM;
      • Pre-out function can be used as Hi-End pre-amp;
      • Classic retro toggle switch operation;
      • Ultra-compact design, very suitable for desktop headphone system;
      • High-precision low-temperature drift resistance, performance is not affected by temperature;
      • High-quality relay and non-impact sound design;
      • 20Hz to 500kHz frequency response;
      • The headphone amplifier has comprehensive protections such as DC, overvoltage, and overload protection;
      • Built-in high-efficiency and low-noise power system.

       

      Product details

      SMSL HO200 Balanced Headphone Amplifier / Preamplifier

       

      Compact and elegant headphone amplifier & preamplifier with output stage capable of delivering up to 6W under 16Ω (3W @ 32Ω). Constitutes an ideal solution to properly drive advanced headsets. This HO200 built by SMSL also has a pre-amplified output and a source selector, which makes it a practical and versatile device for desktop installation.

       

      Simple and efficient interface


      The interface of the HO200 is as simple as it is well thought out. There is a selector dedicated to powering up the device, a three-position gain control (low/mid / high) which is very useful for easily switching between listening to headphones and listening to IEMs. There is also an output circuit selector (preamplifier/headphone amplifier) as well as a source selector (XLR / RCA). Finally, a large rotary knob is dedicated to volume control.

       

      Balanced audio circuit

      The HO200 offers a balanced headphone output on an XLR-4 pole connector, a balanced output on a 4.4mm jack connector as well as an single ended output on a 6.35mm jack connector. It can therefore work natively with sophisticated headphones using different architectures. Its fully balanced audio circuit incorporates 4 ultra-low distortion linear feedback loops. The distortion rate of the HO200 thus reaches 0.00006% / 0.000005% A-WTD, or -126dB, which is an impressive performance capable of revealing all the qualities of the audio signal.

       

      Low noise power stage

      The integrated power supply uses an ultra-low noise architecture of 1.0µv, which allows a signal-to-noise ratio of up to 140dB. A high-quality relay system can completely avoid point noises caused by ignition, an input / output change during playback, to suppress any noise that may disturb the listening experience.

       

      Aluminum housing

      The device is protected by a durable and elegant machined aluminum housing. The latter also limits the appearance of noise if it shares its environment with other electrical devices. This material blocks the waves that can cause electrical micro-variations in the audio circuit and thus avoids amplifying interference.

       

      Specifications: Type: Headphone amplifier/Preamplifier • Inputs: RCA Stereo, XLR balanced • Outputs: RCA Stereo, XLR balanced, 4.4mm balanced jack, 6.35mm jack, XLR 4-pole balanced • THD+N (UN-WTD): -123db 0.00006% (1kHz, 32Ω); -120db 0.00013% (20-20kHz, 32Ω, 0dB) • THD (UN-WTD): -125dB • SNR: 140dB • Output noise: 1.0µV • Input impedance: 10kΩ • Output impedance: ~0Ω (Headphone), 44Ω (Pre out), 22Ω (Balanced Pre out) • Gain:-10dB (low, single ended), +00dB (mid, single ended), +17dB (high, single ended); -04dB (low, balanced), +06dB (mid, balanced), +23dB (high, balanced) • Frequency Response: 20Hz - 500kHz (-3dB) • Power consumption: (EN60065) ≤30W • Standby consumption: ≤0.1W • Power Supply: 100 - 240V • Dimensions: 210 x 40 x 170mm • Weight 1.23 Kg.

       

      What's in the box:

      • 1x HO200
      • 1x Schuko power cable

      Toon meer

      Specificaties

      Artikelnummer
      HO200
      Signaal-ruisverhouding (SNR)
      140dB
      Frequentierespons
      20Hz - 500kHz (-3dB)
      Ingangsimpedantie
      10kΩ
      Stroomverbruik
      ≤30W
      Standby stroomverbruik
      ≤0.1W
      Afmetingen (D x B x H)
      210 x 170 x 40 mm
      Behuizingsmateriaal
      Aluminum

      Toon meer

      Reviews

      0 from 5Based on 0 reviews
      Schrijf een review

      Er zijn nog geen reviews geschreven over dit product..

      HO200 koptelefoon (voor)versterker
      € 347,07
      € 419,95
      HO200 koptelefoon (voor)versterker
      5 Op voorraad
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »