• Incl.Excl.
  • Klantenservice



      Dayton Audio PN470-8 Full-range Woofer

      € 260,29€ 314,95 2 Op voorraad
      • -5% Bestelling 2 voor slechts € 299,20 per stuk

      Buy now, pay later

      • Gratis verzonden (NL & BE)
      • Nu besteld, morgen bezorgd
      • In-house technische support
      • 45 dagen zorgeloos retourneren
      Zakelijke offerteaanvraag
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!


      Dayton Audio's PN470-8 18" pro woofer is designed to deliver reliable low frequency operation with extreme output capability and minimal power compression. Weighing only 16.5 lbs and featuring a 4" inside-outside wound voice coil, powerful neodymium motor, distortion reducing copper pole cap, great excursion capability, and high power handling, the PN470-8 will produce extreme output levels with low distortion without breaking the bank or your back.



      • Only 16.5 lbs., weighs 30% to 50% less than comparible ferrite motor drivers
      • 4" diameter inside/outside wound copper voice coil on glass fiber former
      • Powerful FEA optimized Neodymium motor system (Bl over 25 TM)
      • High efficiency (97 dB SPL at 2.83V/m) for amazing output capability
      • Generous 6.5 mm of Xmax with 48 mm peak-to-peak excursion before damage
      • Large copper cap for inductance control and low distortion
      • Durable fiberglass reinforced ribbed paper cone for rigidity and natural sound


      Product details

      Dayton Audio PN470-8 18" NEO Series Pro Woofer with 4" Voice Coil 8 Ohm


      Dayton Audio left no boxes unchecked on the PN470-8 woofer. It features high power handling, 4" inner and outer wound voice coil, glass fiber former, powerful FEA optimized Neodymium motor, ribbed paper cone, and a copper cap on top of the extended pole piece. Thanks to the lightweight motor assembly, the PN470-8 weighs in at only 16.5 lbs, 30% to 50% lighter than a comparable ferrite driver, making it "Roadie approved" and perfect for mobile DJs and portable PA systems. The PN470-8 is an ideal driver for any high output 2-way and 3-way speaker systems, bass bins, or horn loaded designs.


      Lightweight but Powerful Motor Assembly

      The lightweight but powerful neodymium motor assembly on the PN470-8 has been FEA optimized to provide a combination of low distortion and high efficiency. With the large neodymium magnet mounted inside the voice coil nearly all of the magnetic strength is concentrated into the magnetic gap providing up to 40% better utilization than conventional motor designs. The extended pole piece includes a large copper cap helping to lower distortion and linearize inductance.


      Rugged Construction and Suspension

      To stand up to the use and abuse of the professional sound environment Dayton Audio made sure the PN470-8 can take a beating. The cast aluminum frame uses 8 wide spokes to firmly support the motor assembly, and the thick mounting flange is reinforced to create an incredibly solid mounting surface. The cone, constructed of thick paper for a natural response, includes glass fiber reinforcement and uses a ribbed design offering additional structural support. Supporting the cone is a heavy spider with integrated silver tinsel leads and triple roll treated cloth surround, both designed for high excursion applications allowing the PN470-8 to handle short bursts of excessive power without damage.


      High Power Handling and Low Power Compression

      Along with high efficiency, you need a lot of power to achieve extreme SPL levels. Capable of handling up to 800 watts RMS and 1,600 watt peaks, the PN470-8 can take the heat. The 4" voice coil uses a vented fiberglass former with an inside/outside winding configuration which doubles the coil's exposed surface area for improved heat dissipation. The motor assembly includes a large pole vent along with 8 large peripheral vents in the voice coil gap to keep fresh air moving across the coil keeping the temperature at a minimum. Finally, the frame has venting behind the spider with integrated heatsinks removing as much heat as possible from the sensitive motor and voice coil.

      Toon meer


      Woofer series
      NEO Series
      Woofer type
      Pro Woofer
      Nominale diameter
      Belastbaarheid (RMS)
      800 Watts
      Belastbaarheid (max)
      1,600 Watts
      Impedantie (Z)
      8 ohms
      97.1 dB 2.83V/1m
      30 to 3,000 Hz
      Gelijkstroomweerstand (Re)
      5.6 ohms
      Spreekspoelinductie (Le)
      2.2 mH
      Resonantiefrequentie (Fs)
      31.6 Hz
      Mechanische Q (Qms)
      Elektrische Q (Qes)
      Totale Q (Qts)
      Bewegende massa (Mms)
      Compliantie van de ophanging (Cms)
      0.12 mm/N
      Effectief oppervlak (Sd)
      1217.0 cm²
      Krachtsfactor (BL)
      25.8 Tm
      Equivalentvolume (Vas)
      8.91 ft.³
      Maximale excursie (Xmax)
      6.5 mm
      Cone / Diaphragm Material
      Paper / Glass Fiber
      Spreekspoel draadmateriaal
      Spreekspoel vormermateriaal
      Mand- /framemateriaal
      Cast Aluminum
      Totale buitendiameter
      Totale diepte
      Bolt Circle Diameter
      # Bevestigingsgaten
      Gesloten volume
      2.7 ft.³
      Gesloten F3
      77 Hz
      Gepoort volume
      3.9 ft.³
      Gepoort F3
      48 Hz

      Toon meer


      0 from 5Based on 0 reviews
      Schrijf een review

      Er zijn nog geen reviews geschreven over dit product..

      PN470-8 Full-range Woofer
      € 260,29
      € 314,95
      PN470-8 Full-range Woofer
      2 Op voorraad
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »