• Incl.Excl.
    BTW
  • Klantenservice
    0
    Sluiten

    Categorieën

    Filters

      Dayton Audio ES180TiA Bass-midwoofer

      €165,25€199,95 >10 Op voorraad: levertijd 1 werkdag
      Volume voordeel Geniet van deze geweldige kortingsdeals
      • -5% Bestel 4 voor slechts €189,95 per stuk
      • Verzending altijd verzekerd en met track & trace
      • Voor 16u besteld, vandaag verstuurd
      • Gratis verzending vanaf €99
      • In-house technische support
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!

      Productomschrijving

      The Dayton Audio ES180TiA-8 is a high-tech 7" woofer featuring an FEA-optimized neodymium ring motor structure with dual copper shorting rings for ultra-low distortion. Its enormous 3" edge-wound voice coil on a titanium former provides high power handling and excellent transient response.

       

      Highlights

      • Now with improved frequency response for easier crossover integration
      • Dual copper shorting rings in the motor for reduced energy storage
      • 3" edgewound voice coil on titanium former provides exceptional transient response
      • Woven glass-fiber cone provides excellent stiffness for minimal cone flex
      • High excursion suspension design with tethered tinsel leads and fully ventilated frame
      • High-power, ultra-low-distortion design

       

      Product details

      Dayton Audio ES180TiA-8 7" Esoteric Series Woofer 8 Ohm

       

      Dayton Audio's Esoteric Series is the ultimate expression of Dayton Audio’s transducer engineering knowledge and finesse. Featuring high-end materials and advanced engineering throughout, the Esoteric Series collection of drivers elevates the state of the art in driver design. Now with a flatter frequency response and smoother high frequency roll-off allowing for extended bandwidth and easier crossover integration.

       

      The ES180TiA-8 7” woofer is a technological tour de force, with a fully FEA- and Klippel-optimized design from the powerful neodymium motor assembly with dual shorting rings to the moving structure with large 3” voice coil, titanium voice coil former, and tightly woven glass fiber cone. The voice coil is edgewound using rectangular copper-coated aluminum wire (CCAW) for maximum conductor density within the magnetic gap. The motor structure has been optimized using magnetic finite element analysis (FEA) to provide a symmetrical and extended flux field along the length of the gap, to permit longer excursion beyond the traditional limits in loudspeaker motor design. Dual shorting rings reduce coil inductance by shorting eddy currents created by the coil when it moves, for greatly reduced distortion. A titanium voice coil former was chosen to transmit motor force with maximum efficiency and minimal deformation of the coil former, for supreme resolution. The woven glass fiber cone supports the high force generated by the motor assembly with less deflection than other cone materials. Even the suspension system has been Klippel-optimized for excellent linearity. The attention to detail doesn’t end there – even the voice coil leads are tethered to the black Conex spider to eliminate mechanical resonance.

       

      All of these elements combine to create a driver that breaks new ground with superb transient response and ultra-low distortion. By breaking free from established design conventions and rethinking how each part of the driver should behave, the ES180TiA-8 consistently delivers a musically accomplished performance, time after time. It works well as the woofer in a 2-way high-performance loudspeaker system, and the 8-ohm impedance makes it a natural choice for dual woofer configurations.

      Specificaties

      Artikelnummer
      ES180TiA
      Woofer series
      Esoteric Series
      Woofer type
      Midwoofer
      Nominale diameter
      7"
      Belastbaarheid (RMS)
      100 watts
      Belastbaarheid (max)
      200 watts
      Impedantie (Z)
      8 ohms
      Gevoeligheid
      84.8 dB @ 2.83V/1m
      Frequentierespons
      35 - 5,500 Hz
      Spreekspoeldiameter
      75 mm
      Gelijkstroomweerstand (Re)
      7.4 ohms
      Spreekspoelinductie (Le)
      1.13 mH @ 1 kHz
      Resonantiefrequentie (Fs)
      33.7 Hz
      Mechanische Q (Qms)
      4.90
      Elektrische Q (Qes)
      0.44
      Totale Q (Qts)
      0.40
      Bewegende massa (Mms)
      26.8g
      Compliantie van de ophanging (Cms)
      0.84 mm/N
      Effectief oppervlak (Sd)
      132.7 cm²
      Maximaal verplaatst volume (Vd)
      70.3 cm³
      Krachtsfactor (BL)
      9.8 Tm
      Equivalentvolume (Vas)
      20.7 liters
      Maximale excursie (Xmax)
      5.3 mm
      Cone / Diaphragm Material
      Nomex Cone
      Surroundmateriaal
      Rubber
      Spreekspoel draadmateriaal
      CCA
      Spreekspoel vormermateriaal
      Titanium
      Mand- /framemateriaal
      Cast Aluminum
      Magneetmateriaal
      Neodymium
      Totale buitendiameter
      175 mm
      Totale diepte
      74.3 mm
      Montagegatdiameter
      148.3 mm
      # Bevestigingsgaten
      6
      Gesloten volume
      0.19 ft.³
      Gesloten F3
      71 Hz
      Gepoort volume
      0.57 ft.³
      Gepoort F3
      40 Hz

      Toon meer

      Reviews

      0 from 5Based on 0 reviews
      Schrijf een review

      Er zijn nog geen reviews geschreven over dit product..

      Gerelateerde producten

      Maak uw aankoop compleet

      ES180TiA Bass-midwoofer
      € 165,25
      € 199,95
      ES180TiA Bass-midwoofer
      >10 Op voorraad: levertijd 1 werkdag
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »