Klantenservice
0
Sluiten

Categorieën

Filters

    Dayton Audio Epique E160CF-8 5-1/4" Carbon Fiber Cone Neodymium Driver 8 Ohm

    € 247,89€ 299,95 2 Op voorraad: levertijd 1 werkdag
    Volume voordeel Geniet van deze geweldige kortingsdeals
    • -5% Bestel 4 voor slechts €284,95 per stuk
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd*
    • Gratis verzending vanaf €99
    • In-house technische support

    Productomschrijving

    Dayton Audio raised the bar with the Epique E160CF-8 5-1/4" woofer. Constructed of high-end materials like a damped carbon fiber cone, titanium former, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion. In addition, the low moving mass, underhung voice coil, and powerful motor allows the E160CF-8 to deliver incredible dynamics and transient response.

     

    Highlights

    • FEA optimized underhung neodymium motor minimizes distortion, increases efficiency, and improves electrical damping
    • Titanium former provides virtually no eddy currents improving efficiency and transient response
    • Damped carbon fiber cone lowers moving mass and minimizes unwanted resonances
    • Large shorting sleeve lowers inductance and extends frequency response
    • EVS™ (Extensive Venting System) allows generous airflow around the voice coil reducing power compression

     

    Product details

    Dayton Audio Epique E160CF-8 5-1/4" Carbon Fiber Cone Neodymium Driver 8 Ohm

     

    The Epique E160CF-8 5-1/4" woofer from Dayton Audio combines high-end materials with advanced engineering to create a truly world class, no-compromise driver. Dayton Audio has scrutinized and optimized every aspect of this driver to keep distortion as low as possible while still producing impressive efficiency and a frequency response that is easy to work with. You can expect excellent off-axis and transient response from the E160CF-8 for a great sound stage and realistic sound reproduction. With top-notch components and quality construction, these drivers exemplify the axiom, "The whole is far greater than the sum of its parts."

     

    The Epique E160CF-8 design is all about low distortion and high dynamics. The proprietary FEA optimized motor assembly uses a large neodymium magnet with top and bottom plates thick enough to provide an impressive amount of force across the magnetic gap. The pole piece includes a thick aluminum shorting sleeve that minimizes inductance and provides virtually linear impedance up to 20,000 Hz (under 12 ohms at 20,000 Hz).

     

    Driving the cone is a 1.5" (38 mm) underhung dual layer voice coil wrapped around a titanium former that generates minimal eddy currents improving efficiency and transient response. The focal point of the E160CF-8 is the one-piece epoxy coated carbon fiber cone. Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound. A rubber surround and large flat spider suspends the cone and keeps it linear through the limits of excursion with minimal restriction, further improving dynamics and transients.

     

    Holding everything together is the open cast aluminum frame, which is rigid but minimalistic enough to allow plenty of "breathing room" for the back side of the cone to keep reflections under control. One other aspect of this driver that deserves attention is the EVS™ (Extensive Venting System) voice coil and motor venting. To keep the voice coil and magnet cool while minimizing compression and extraneous noise the E160CF-8 has 16 large openings under the spider, 9 peripheral vents in the voice coil gap, and a large aerodynamic dual flared vent through the pole piece.

    Specificaties

    Artikelnummer
    E160CF-8
    Woofer series
    Epique Series
    Woofer type
    Full-range
    Nominale diameter
    5.25"
    Belastbaarheid (RMS)
    100 watts
    Belastbaarheid (max)
    200 watts
    Impedantie (Z)
    8 ohms
    Gevoeligheid
    89.0 dB @ 2.83V/1m
    Frequentierespons
    50 - 8,000 Hz
    Spreekspoeldiameter
    1.5"
    Gelijkstroomweerstand (Re)
    6.1 ohms
    Spreekspoelinductie (Le)
    0.71 mH
    Resonantiefrequentie (Fs)
    52.5 Hz
    Mechanische Q (Qms)
    4.61
    Elektrische Q (Qes)
    0.51
    Totale Q (Qts)
    0.46
    Bewegende massa (Mms)
    11.3 g
    Compliantie van de ophanging (Cms)
    0.82 mm/N
    Effectief oppervlak (Sd)
    108.8 cm²
    Maximaal verplaatst volume (Vd)
    43.5 cm³
    Krachtsfactor (BL)
    6.7 Tm
    Equivalentvolume (Vas)
    13.7 liters
    Maximale excursie (Xmax)
    4.0 mm
    Cone / Diaphragm Material
    Carbon Fiber
    Surroundmateriaal
    Rubber
    Spreekspoel draadmateriaal
    Copper
    Spreekspoel vormermateriaal
    Titanium
    Mand- /framemateriaal
    Cast Aluminum
    Magneetmateriaal
    Neodymium
    Totale buitendiameter
    6.19"
    Totale diepte
    1.46"
    Montagegatdiameter
    5.31"
    Bolt Circle Diameter
    5.79"
    # Bevestigingsgaten
    6
    Gesloten volume
    0.18 ft.³
    Gesloten F3
    97 Hz
    Gepoort volume
    0.58 ft.³
    Gepoort F3
    51 Hz

    Reviews

    0 from 5Based on 0 reviews
    Schrijf een review

    Er zijn nog geen reviews geschreven over dit product..

    Gerelateerde producten

    Maak uw aankoop compleet

    Epique E160CF-8 5-1/4" Carbon Fiber Cone Neodymium Driver 8 Ohm
    € 247,89
    € 299,95
    Epique E160CF-8 5-1/4" Carbon Fiber Cone Neodymium Driver 8 Ohm
    2 Op voorraad: levertijd 1 werkdag
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »