• Incl.Excl.
    BTW
  • Klantenservice
    0
    Sluiten

    Categorieën

    Filters

      Dayton Audio DSPB-250 2x50W Class D Audio versterkermodule with DSP

      € 49,55€ 59,95 4 Op voorraad: levertijd 1 werkdag
      • Verzending altijd verzekerd en met track & trace
      • Voor 16u besteld, vandaag verstuurd
      • Gratis verzending vanaf €99
      • In-house technische support
      Heeft u vragen over dit product?

      Heeft u vragen over dit product?

      Onze klantenservice helpt u graag verder!

      Productomschrijving

      Dayton Audio DSPB-250 combines a 2 x 50W amp board with the ADAU1701 digital signal processor which enables you to customize sound using SigmaStudio software and Dayton Audio ICP1 Bluetooth programmer. Use the DSPB-250 as the heart of your DSP audio project, or combine it with the KAB-250v3 to make a Bluetooth DSP 4-channel project.

       

      Highlights

      • Wire harnesses make installation quick and simple with no soldering required -- includes power, Aux-in and speaker cables
      • Connects directly to KAB-230v3 and KAB-250v3 with optional wiring harness (sold separately) to achieve 4-channel output and Bluetooth capabilities
      • Separate ports for powering by battery or direct DC input from 12 to 24V power source
      • Program with SigmaStudio software and Dayton Audio ICP1 (sold separately)
      • Efficient 2 x 50W of power from the TPA3116 amp chip
      • 5-year Dayton Audio warranty

       

      Product details

      Dayton Audio DSPB-250 2x50W Class D Audio Amplifier Board with DSP

       

      High Quality Audio Performance. The Dayton Audio DSPB-250 DSP Amplifier Board delivers high quality sound without drawing a lot power. This is due to the highly efficient TPA3116 Class D amplifier chip. The TPA3116 operates at 88% efficiency, thus eliminating the need for a large heat sink and reducing its overall size. Its high efficiency becomes a major advantage when powering from batteries as it prolongs the playtime of a single charge. Its ultra-low distortion and pop-free performance make this hi-fi amplifier board an integral asset in any quality audio build.

       

      Integrated DSP Chip: Unlike other amplifier boards, the Dayton Audio DSPB-250 includes a built-in ADAU1701 DSP chip. Create nearly limitless possibilities of EQ, crossover, bass enhancement, time alignment and more thanks to the ADAU1701 DSP chip. Make advanced crossovers with ease without circuit knowledge, capacitors, inductors, or preamp boards, and get almost immediate feedback on how your project sounds. SigmaStudio software and Dayton Audio DSPB-ICP1 programming board (sold separately) combine together to let you set audio parameters to produce hi-fi quality sound. Download SigmaStudio into your desktop or laptop computer and plug the small ICP1 board into the USB port using a micro USB cable (sold separately). To quickly adjust the sound there are four potentiometers on the DSPB-250 amp board.

       

      Easy Installation: Included with the DSPB-250 are three wire harnesses: one for DC power, one for Line-input, and the other for connecting to stereo speakers. For many users, these cables are all that is needed to complete a project. Since they have additional on board connectors, wiring harnesses (sold separately) are available to speed-up installation and create confident connections without soldering.

       

      Package Includes: One Dayton Audio DSPB-250 DSP Amplifier Board • One 2-conductor power cable 20" • One 4-conductor speaker cable 20" • One 3.5 mm line-input cable 20"

       

      Specifiactions: Power output (w/ 24 VDC power supply): 2 x 50W @ 4 ohms • SNR: 88 dB 2 x 50W @ 4 ohm, THD+N=1%, 26 dB, A-weighting • 2 x 50W @ 4 ohm, THD+N = 1%, 200 Hz • THD+N: 0.06% 10W @ 4 ohm 1 kHz 24 dB • Frequency response: 20 to 20,000 Hz (±3 dB) • Impedance: 4-8 ohms • Recommended power supply: 12 to 24 VDC, 4A • Board mounting holes center to center spacing: 3.32" x 2.4" (84 x 61 mm) • Hole diameter: 0.14" (3.5 mm) • Dimensions: 3.6" L x 2.7" W x 0.9" H

      Specificaties

      Artikelnummer
      DSPB-250
      Nominaal vermogen
      2 x 50 watts at 4 ohms
      Minimale belasting
      4 ohms
      Efficiëntie
      84 %
      Signaal-ruisverhouding (SNR)
      88 dB
      Vervorming

      0.04 % THD at 1 kHz, 4 ohms, 5 watts
      0.06 % THD at 1 kHz, 4 ohms, 10 watts

      Frequentierespons
      20 - 20,000 Hz
      Versterkingsfactor
      26 dB
      Ingangsgevoeligheid
      0.77 V
      Ingangsimpedantie
      10k ohms
      Amplifier Classification
      Class D
      Versterkertopologie
      Texas Instruments TPA3116
      Uitgangskanalen
      2
      Ingangsconnector
      4 pin PCB connector
      Uitgangsconnector
      4 pin PCB connector
      DSP-functionaliteit
      Bluetooth
      -
      EQ-correctie
      Voedingsvereisten
      12 - 24 VDC
      Voedingsconnector
      2 pin PCB connector
      Stroomlimiet
      -
      Onder-/overspanningsbeveiliging
      -
      Afmetingen (L x B x H)
      91 x 69 x 23 mm
      Afstand tussen bevestigingsgaten
      84 x 61 mm
      Diameter bevestigingsgaten
      3.5 mm

      Toon meer

      Reviews

      5 from 5Based on 1 reviews
      Schrijf een review
      5 van 5
      Es wurde keine Beschreibung gegeben.
      Door Wolfgang R. on 12 Februari 2021

      Gerelateerde producten

      Maak uw aankoop compleet

      DSPB-250 2x50W Class D Audio versterkermodule with DSP
      € 49,55
      € 59,95
      DSPB-250 2x50W Class D Audio versterkermodule with DSP
      4 Op voorraad: levertijd 1 werkdag
      Toevoegen aan winkelwagen
      Vergelijk 0

      Voeg nog een product toe (max. 5)

      Start vergelijking

      Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »