Dayton Audio DAEX32SQ-8 Square Frame 32mm Exciter 10W 8 Ohm

    € 16,90€ 20,45 >10 Op voorraad: levertijd 1 werkdag
    Volume voordeel Geniet van deze geweldige kortingsdeals
    • -5% Bestel 4 voor slechts €19,43 per stuk
    • -10% Bestel 10 voor slechts €18,41 per stuk
    • Verzending altijd verzekerd en met track & trace
    • Voor 16u besteld, vandaag verstuurd*
    • Gratis verzending vanaf €99
    • In-house technische support


    Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX32SQ-8 square frame exciter uses a 2-layer 1-1/4" voice coil for high power handling. The square frame design provides additional support for the motor assembly to produce lower distortion when driven to its limits.



    • Extended range and wide dispersion
    • 32 mm 2 layer voice coil for high, 10 watts RMS, power handling
    • Pre-applied 3M VHB adhesive for quick, secure installation
    • 8 ohms impedance for easy connection to most amplifiers


    Product Details

    Dayton Audio DAEX32SQ-8 Square Frame 32mm Exciter 10W 8 Ohm


    Dayton Audio's DAEX32SQ-8 square frame 32mm exciter gives you the ability to turn almost any solid surface into a truly invisible high-fidelity speaker. With a 1-1/4" 2-layer voice coil this exciter is capable of great power handling and impressive overall output capability. The square frame design gives this exciter additional mounting area to help support the powerful motor assembly and provide improved linearity when mounted to vertical surfaces.


    A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 1.25" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick!


    Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.


    Specifications: • Power handling: 10 watts RMS • VCdia: 1.25" (32 mm) • Nominal impedance: 8 ohms • Re: 8 ohms • Le: 0.51 mH • Fs: 481 Hz • Dimensions: 2" (51 mm) W x 2.43" (61.8 mm) H x 0.89" (22.5 mm) D • Weight: 130 grams.


    ApplicationFull-Range Exciter
    Impedance8 ohms
    Power Handling (RMS)10 Watts


    Belastbaarheid (RMS)
    10 watts
    Belastbaarheid (max)
    8 ohms
    481 Hz
    Gelijkstroomweerstand (Re)
    8 ohms
    Spreekspoelinductie (Le)
    0.51 mH
    Totale Q (Qts)
    Bewegende massa (Mms)
    3.4 gr
    Compliantie van de ophanging (Cms)
    0.32 mm/N
    7.98 Tm
    32 mm
    Totale buitendiameter
    Totale hoogte
    22.5 mm
    Totale afmetingen (L x B x H)
    61.8 x 51 x 22.5 mm
    Bevestiginsoppervlak afmetingen
    51 x 51 mm
    # Bevestigingsgaten
    3M VHB adhesive pre-applied
    130 grams


    0 from 5Based on 0 reviews
    Schrijf een review

    Er zijn nog geen reviews geschreven over dit product..

    Gerelateerde producten

    Maak uw aankoop compleet

    DAEX32SQ-8 Square Frame 32mm Exciter 10W 8 Ohm
    € 16,90
    € 20,45
    DAEX32SQ-8 Square Frame 32mm Exciter 10W 8 Ohm
    >10 Op voorraad: levertijd 1 werkdag
    Toevoegen aan winkelwagen
    Vergelijk 0

    Voeg nog een product toe (max. 5)

    Start vergelijking

    Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergenMeer over cookies »