• miniDSP 2x4 Kit Digital Signal Processor Assembled Board
  • miniDSP 2x4 Kit Digital Signal Processor Assembled Board

miniDSP 2x4 Kit Digital Signal Processor Assembled Board

MiniDSP 2x4 kit, our low cost audio processing board for DIY audio applications. Great sound in a 3" package.
Delivery time:
Depends per country, see shipping page
Availability:
In stock (2)
Reviews:
Buy 4 for €94,95 each and save 5%

€99,95
Incl. tax

MiniDSP 2x4 kit, our low cost audio processing board for DIY audio applications. Great sound in a 3" package.

 

Highlights

  • 28/56bit DSP Engine
  • 24 bit ADC/DAC resolution
  • 48kHz sampling rate
  • Unbalanced inputs switchable with a jumper between 0.9Vrms and 2Vrms 
  • Unbalanced outputs: Max 0.9Vrms 
  • Digital Audio input/outputs via I2S ports on expansion connectors
  • Nichicon Muse Audiophile capacitors
  • Volume control by potentiometer on 3pin header
  • 5pin, 2.54mm pitch header for panel mount USB connector
  • Plug&Play USB driver and real time Software configuration using miniDSP plug-ins
  • Device does not required a PC once configured
  • USB self powered device and wide range of DC power options (4.5 to 24VDC)

 

Product detail

MiniDSP 2x4 kit

The original miniDSP kit that started our story! A low cost, low power and great sounding module optimized for DIY/System tuning project.  With our “one platform, many configuration” concept, MiniDSP gives great flexibility to engineers, A/V designers and DIYers at a fraction of the cost of typical alternatives to tune their audio system. May it be a multi-way digital crossover, tuning your subwoofer room and simple room correction, it's up to your imagination.

The miniDSP 2x4 kit is a low cost audio processing module featuring Digital Signal Processing (DSP) and onboard DAC/ADC. Fitting between your source and your amplifier, this pocket size module packs all the filter tools you need to get started with tuning your 2way, 4way, subwoofer.

At the core of the miniDSP 2x4 kit solution is the combination of intelligent onboard firmware combined with our flexible software plug-in. At miniDSP, we believe in making DSP programming easy thanks to our intuitive Graphic User Interface (GUI). May it be a PC or Mac, the first step will involve programming the device over the driverless USB 2.0 port. Using the onboard Digital Signal Processor (DSP), one can configure the onboard parametric/graphic equalizers (PEQ), crossovers, levels and time alignment and hear live changes. Flash the onboard memory and you can disconnect your PC/Laptop as the configuration is now saved in the internal flash memory forever.

Finally, our “one platform, many configuration” concept gives great flexibility to engineers, A/V designers and DIYers at a fraction of the cost of typical alternatives to tune their audio system. May it be a multi-way digital crossover, tuning your subwoofer room and simple room correction, it's up to your imagination.

 

Documents

 

Mechanical Specifications

 

PRODUCT SPECIFICATIONS  
Digital Signal Processor Engine 28/56 bit Digital Signal Processor Engine / Double precision processing
Sample rate 48kHz
ADC/DAC Data resolution 24 bits
Analog Audio Input Unbalanced input, gold plated RCA terminated
Maximum input level 0.9Vrms / 2Vrms selectable by jumper configuration
Dynamic range, un-weighted >98dB
Input Impedance 0.9Vrms position = 9kOhms / 2Vrms position = 20k Ohms
Analog Audio Output Unbalanced input, gold plated RCA terminated
Maximum level, unbalanced 0.9Vrms (2.5Vpp)
Dynamic range, un-weighted >98dB
Output Impedance 560ohms
Expansion connector signals 2ch x I2S in/ 4ch x I2S out / Analog INx2 / Analog Out x 4/ 3pin connector for volume control on 10k linear potentiometer 5pin USB header for panel mount USB connector
Power supply USB powered and/or 4.5~24Vdc input via header (150mA @ 5V) 2.1mm round DC plug
Dimensions (H x W x D) 75mm x 75mm

 

0 stars based on 0 reviews Add your review